Cleanroom Testing
Services & Equipment Suppliers
 
   
 
 
 

HOME \ PRODUCT RANGE \ Ionization / Electrostatics Mgt Solutions \

SCS USA Static Control Products
 

SCS, previouly known as Desco Industries, is the largest manufacturer of Static Control products in North America, developing high-tech solutions for static control challenges, particularly in promoting the use of workstation continuous monitors. 3M Static Control which acquired Credence Technologies in 2006 led to the development of high-end monitoring equipment for ESD (ElectroStatic Discharge) control compliance. In 2015, Desco Industries, Inc. of Chino, California purchased the assets of the 3M Static Control business thereby creating the largest manufacturer of Static Control products in North America. This purchase led to the creation of Desco Industries newest brand, SCS.

SCS Static Management Program (SMP) continuously monitors your ESD process control system throughout all stages of manufacturing. SMP captures data from SCS workstation, equipment and ESD event continuous monitors and provides a real-time picture of critical manufacturing processes. All activity is stored into a database for on-going quality control purposes. SMP allows you to pinpoint areas of concern and prevent ESD events. Quantifiable data allows you to see trends, become more proactive and prove the efficiency of your ESD process control system. SMP Network utilized a common SMP system setup that utilizes the server software, client software, WS Aware Monitor, EM Aware Monitor, and Ground Master Monitor.

 
 
 
   
  EM Eye Meter
   
 
The SCS EM Eye Meter is capable of providing measurements for many various parameters, which are determined by the type of sensor connected to the EM Eye Meter. Below are the three sensors that are available now:

ESD Events Detection – The portable, easy-to-use EM Eye Meter serves as a measuring instrument for most ESD signals. The EM Eye Meter measures the magnitude of ESD events. This meter also estimates the events’ magnitude for CDM, HBM and MM models.

Electromagnetic Field Measurement – Enables the EM Eye Meter to be transformed into an EMF Meter, Power Density Meter and EIRP Meter.

RF Signal Sensor – The EM Eye Meter measures the amplitude of an RF signal.
   
 
 
     
 
 
   
  EM Aware Monitor
   
 
The SCS 770066 EM Aware Monitor monitors three key parameters that keep you aware of critical symptoms of ESD problems: ESD events, change in static voltage field, and ionizer performance*. The thresholds for these parameters are fully adjustable. The monitor is constructed of an aluminum enclosure, LCD display, control joystick, remote antenna, relay terminal and Ethernet connectivity.

ESD events generate electromagnetic radiation. The stronger the ESD event, the stronger the electromagnetic radiation. The EM Aware Monitor is a miniature radio receiver tuned to detect and measure the unique waveform generated by an ESD event.
 
 
     
 
 
   
  Ground Master Monitor
   
 
The SCS Ground Master Monitor is an equipment ground continuous monitor for metal tools. It continuously monitors the path-to-ground impedance and electromagnetic integrity of eight metal ground connections of process tools in work areas. This includes semiconductor, disk drive, flat panel, and electronic equipment manufacturing environments. The monitor provides both visual and audible alarms and includes fuse protection for each channel.

The Ground Master Monitor continuously monitors eight metal tools for electromagnetic interference (EMI). EMI can cause equipment lockups and malfunction. The Ground Master Monitor will alarm if EMI is detected.

Each Ground Master Monitor is calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology (NIST) and includes a certificate of calibration.

 
 
     
 
 
   
  WS Aware Workstation Monitor
   
 
The WS Aware Workstation Monitor works with dual wrist straps that have a standard 3.0 mm audio mono plug. It verifies proper wearing of a wrist strap by measuring an operator’s resistance.

A charge can be easily developed on a body during movements. WS Aware Workstation Monitor detects body voltage and alarms if it exceeds the preset level.

Alarm thresholds for body resistance and body voltage are set at the factory but can be changed in the field.

The WS Aware Workstation Monitor provides independent monitoring of four grounds – two tool grounds and two mat grounds. An option for four tool grounds is also available.

 
 
     
     
  top  

 

  Ionization / Electrostatics Mgt Solutions
     
  Room Ionization Systems
  Ionizing Bars
  Benchtop Ionizers
  Overhead Ionizers
  CDA / Gas In Line Ionizers
  Critical Environment Ionizers
  Tools/Special Application Ionization
  SCS USA Static Control Products
  Static Control & Neutralizing Systems
  Static Charging Systems
  Instrumentation
  Services
     
 

 

 
     
 
 
 
 
 



Copyright © 2009 - 2013 CESSTECH. All Rights Reserved. | Sitemap